Posts Tagged ‘mr-03 wheels


Just a quick try to make usable 3D printed wheels for Kyosho Mini-Z RC car, these are for MR-02 or MR-03 models, will not fit on AWD. Standard wheels with 0 offset, front and rear wheel. Do note this is a work in progress as it needs a little bit of fine tuning on the inside where you place plastic bushings or bearings. You need to print with finer resolution such as 0.1mm for best results and use support material for the inside to print well.

To download the 3D printable Kyosho Mini-Z MR-02/MR-03 Wheels (0 offset)…