Posts Tagged ‘drift tires

mini-z-plastic-drift-tires

Here is our design for plastic drift tires for Mini-Z RC cars that are made to be 3D printed using PLA filament. Make sure you use PLA and not ABS as with ABS there will be some shrinking and the resulting tires may be hard to fit on the rims. If this happens, could happen with PLA as well, you can try soaking the tires in hot water for a bit to soften them up and then insert them on the rims of the Mini-Z RC model. They will become hard again when they cool down and should fit nice and tight on the model. You can experiment with these plastic drift tires, they should fit on all on-road models of Mini-Z such as MR-02, MR-03 and MA-010 etc.

To download and 3D print the Mini-Z Plastic Tires for Drifting 3D model…

mini-z-flexible-drift-tires

We’ve designed a pair of flexible tires (front and rear) for Mini-Z cars with the idea to see how these 3D printed tires will perform on a Mini-Z track, but it has turned out that they are good only for drift even though they are printed from a flexible rubber/silicone like material and not from plastic. So here are the front and rear flexible tires for Kysho Mini-Z RC cars, designed to be 3D printed from a flexible filament such as NinjaFlex or Arnitel Eco flexible filament.

mini-z-flexible-drift-tires-2

They will stretch a bit when put on the rims and fit very tight, so you should only print using flexible and not hard plastic filament. Do not print them using plastic material such as PLA or ABS, we are coming with a separate design for plastic tires to be printed from PLA ad these should be good for drifting as well. We are looking at different exotic materials that could turn out to be softer more like the original rubber tires. Meanwhile you can experiment with these, they should fit on all on-road models of Mini-Z such as MR-02, MR-03 and MA-010 etc.

To download and 3D print the Mini-Z Flexible Tires for Drifting 3D model…


top