kyosho-mini-z-shock-collars

A set of 3D printable collars for the shocks of Mini-Z RC cars, these are available in three different sizes for finer regulation of the spring tension of the shock – 0.5mm, 1mm and 1.5mm. They should be fully compatible with both the stock shocks used on the MR-02 and MR-03 cars as well as with tuning shocks such as the aluminium ones by Route 246 for example. Do note that the size of this shock collars is specifically for the center shock that connects the main chassis to the rear motor mount, they will not work with other smaller shocks that may be a part of third party suspension – front or rear for the Mini-Z.

To download the 3D printable Shock Collars for Kyosho Mini-Z RC Cars…

kyosho-mini-z-mr-03-t-plates

A set of 3D printable T-plates for the Kyosho Mini-Z MR-03 RC cars, available for both MM/LM and RM/HM chassis. These are not compatible with the older MR-02 H-plates as the design of the T-plates has changed with the newer Kyosho MR-03 Mini-Z models. The T-Plates provided are with 0.8 mm, 1 mm, 1.2 mm, 1.4 mm and 1.6 mm height, so that you can get different stiffness of the plate. Furthermore you can vary the stiffness you get with the percentage of the infill you are using until you get the desired results. Feel free to experiment with different settings and if you print and use these T-plates please share your feedback what works best for you on your Mini-Z RC model.

To download the 3D printable T-Plate for Kyosho Mini-Z MR-03 MM/LM…
To download the 3D printable T-Plate for Kyosho Mini-Z MR-03 RM/HM…

top