Archive for the ‘Kyosho Mini-Z Racer’ Category

adjustable-body-clips-for-mini-z

We have designed a 3D printable user adjustable size body clips for Mini-Z bodies that should be compatible with almost all car bodies for Mini-Z except for some too exotic models probably. The side body holders are designed to fit equally well on MR-02, MR-03 (RWD) and MA-010 and MA-020 (AWD) chassis. You get two STL files, one with the body clip itself and a second one with the adjustment adapters (1 mm, 1.5 mm and 2 mm) that you glue on the main body clip depending on the size you need – the adapters are available in 3 different sizes to make it easy to adjust the right size. When you have the needed size glued together you need to glue the completed side body holder to the Mini-Z body and repeat the procedure for the other side for the body. You need to 3D print these with finer resolution, 0.1 mm layer height should work pretty well, but you may want to experiment for best results on your 3D printer. Also make sure you have the printing of support enabled as a support structure is needed for the proper printing of some of the elements.

To download the 3D printable Universal Adjustable Side Body Holders for Kyosho Mini-Z Bodies…

kyosho-mini-z-front-body-spacer

An easy and useful way of adjusting the height of the body at the front of your Kyosho Mini-Z RC model is to control the position of the front body mount. By adding a spacer under the front body mount you can lower the front of the car’s body to make it more aerodynamic and stable on the track. So we have designed an easy to use spacers to go under the front body mount to help you adjust the body height at the front of the card in a more easy and straightforward way without having to rely on shims. The 3D printable front body holder spacers are available in two different heights, to make it easy for you to adjust the height more precisely – 0.5 mm and 1 mm. Make sure you 3D print them using finer layer height such as 0.1 mm for best results.

To download the 3D printable Front Body Holder Spacer for Kyosho Mini-Z RWD/AWD…

kyosho-mini-z-front-knuckle-spacers

A set of 3D printable spacers for the front knuckles of the Kyosho Mini-Z MR-02 and MR-03 RC models. These are used for regulating the height of the front suspension as well as limiting the maximum travel of the car’s wheels. We have the spacers available in three different sizes in order to help you get finer tuning ability, so here are spacers height 0.5 mm, 1 mm and 1.5 mm. You can also combine multiple spacers to get the desired height adjustment. Make sure you use finer resolution for printing these out as they are quite small and need to be precise, we have used 0.1 mm layer height for a great result. Also you might need to lower the extrusion speed a bit while 3D printing the part for best results.

To download the 3D printable Front Knuckle Spacers for Kyosho Mini-Z MR-02/MR-03…


top